2013 Audi A6 Allroad Estate/C7 model having a Westfalia Detachable Swan Neck towbar installed with Audi specific dedicated trailer socket. All lower bumper trim modifications were done underneath the vehicle so nothing can be seen when standing back from the vehicle. The Westfalia detachable neck is so easy to remove it you can do it with one hand.
Click here for demonstration of how the Audi A6 dedicated towbar wiring integrates with the vehicle
Click here for Audi RS6 towbar fitting
Audi R8 having a Thatcham S5 VTS tracker with immobiliser installed. We have used the Scorpion S5 which comes with driver recognition cards giving protection against key theft and cloning.
2017 Audi Q2 (Ga) Sport model installed with Front Parking Sensors using a flush mounted system manufactured by Vodafone Automotive (Cobra F0394) which are only 17mm in diameter. The Front PDC kit comes with a separate switch which is used only if you wish to manually bring them on. When you are parking they will come on automatically.
Our photos show before, during and after installation shots.
2017 Audi Q2 (Ga) Sport model installed with Rear Parking Sensors using a flush mounted system manufactured by Vodafone Automotive (Cobra R0394) which are only 17mm in diameter. Bumper was removed, OE markings identified, the sensor holes are punched through giving a perfect finish.
For Audi Q2 Front Parking Sensors click here
Our photos show before, during and after installation shots.
2015 Audi a4 Allroad (b8 facelift) installed with detachable Westfalia towbar and Audi Dedicated wiring which integrates into the cars ECU. This model already had the large opening in the lower bumper valance (metal section) so no need for any additional bumper modifications.
2019 Audi Q5 (FY) installed with a Westfalia detachable swan neck towbar and associated Audi integrated electrical system.
2012 Audi A5 Convertible (8f chassis) installed with a Tow Trust detachable towbar and 7pin electrics for a cycle carrier and trailer. This a5 has the S-Line bumpers, just a small trim under the lower central bumper skirt.
2019 Audi RS5 installed with a Ghost 2 Immobiliser. This is a Carbon Edition which was a limited production run hence our customer would like to keep safe.
2018 Audi RS3 installed with Scorpion S5-VTS insurance approved tracker and immobiliser. This vehicle is monitored 24 hours/day and will not start unless the driver has the Driver Recognition Card in the vehicle protecting against key cloning and key theft
2015 Audi Q5 S-Line installed with a tow Trust removable towbar & Vehicle specific wiring that integrates into the Audi ECU. This vehicle had the factory removable lower bumper panel, when you have finished towing just remove the towing neck and place the panel back on.
2019 / b9 Audi RS4 Avant installed with a Detachable Westfalia towbar and Audi dedicated 13pin wiring socket.
2015 Audi S8 installed with a detachable westfalia towbar and Audi dedicated & approved 13pin caravan socket. Rear sensors auto turn-off, vehicle monitors the caravans bulbs and gives warnings on the dash should any fail, various other safety features are enabled to make towing safe.
2019/b9 chassis AUDI A4 Estate with Westfalia detachable tow hook and audi approved wiring giving bulb warnings on the dash, auto rear pdc cut-off, auto handbrake adjust, traction control adjust, trailer stability enabled plus more
2020 Audi Q5 for Thatcham S5 Tracking system. Insurance approved which includes Driver recognition, immobiliser and full UK and Europe coverage.
Audi Q3 2011-2018 model installed with a Towtrust removable swan neck towbar and dedicated Westfalia approved wiring all coded in-house and fully operational. When towing the car will automatically change various features on the car, some safety related and others comfort like turning of the rear park sensors for you.
2019 Audi E-Tron GPS Fleet Tracking System installation being completed.
Mk2 Audi TT upgraded with a Pioneer SPH-DA230DAB, rear parking camera and Thinkware f770 pro. We removed the original Audi Symphony system but retained the function of both amplified speakers and steering wheel controls so they work in harmony with the new Pioneer. Thinkware f770 pro contains front and rear recording cameras with auto turn on function in the event of an incident whilst the car is locked.
Audi a3 (8v facelift) auto dimming rear view mirror retrofit was completed using genuine mirror and wiring harness. The new style slimline mirror was installed and wired into the MQB platform.
Audi S3 / A3 Front parking sensor retrofit using genuine Audi APS Plus (audi parking system). Giving full interactive audible and optic display. This s3 only had audible rear sensors so when we retrofitted the fronts we adapted the rears to display on the radio too. We have colour matched the outer sensors to the body colour and the inner grill sensors too.
Audi A3/S3 (8v facelift) reversing camera retrofit. Genuine RVC high camera kit used and coded using VW dealer tool. This is the 2017 onwards facelifted Audi S3 car.
2019 Audi Q3 (f3 chassis) Witter Removable towbar with 13pin Audi dedicated and approved wiring. In house ECU Coding ensures the new trailer module communicates with all other necessary modules within the car.
Audi R8 Reversing Camera Retrofitted using the original virtual cockpit display, various display options available.
