2026 Audi Q5 (GU) detachable towbar. Third generation Audi Q5 (GU Chassis) installed with a detachable towbar and 13pin dedicated Audi wiring (VSK).
All photos provided were taken after installation. With the towbar neck removed and the towing socket neatly swivelled upwards, the setup remains highly discreet, preserving the vehicle’s original appearance.
Allow around four hours for this Audi Q5 towbar installation.
2022 Audi A3 (8Y Chassis) installed with a reversing camera viewed through the Audi radio/infotainment system.
The new boot handle camera replaces the original boot switch to give an OE look.
If you have factory fitted Audi Optical Parking Sensors these will be overlayed (like a hologram) over the full screen image. This vehicle only has audible reversing sensors).
This is an aftermarket retrofit which gives a full screen image. We also offer a genuine Audi retrofit with coding, this option gives a 2/3 image with Optical Parking Sensors taking up the last 1/3 of screen (same as all modern Audi’s).
These works are completed at our workshop in Bristol, UK.
2022 Audi Q2 retrofitted with reversing camera and front parking sensors.
We have installed Vodafone Automotive (Cobra) front parking sensors. Mounted into the original blanks as seen in the first image. Factory look!
The boot handle reversing camera we installed has been coded into the Audi Infotainment screen. The image is automatically produced when reverse gear is engaged.
These parking sensor and reversing cameras have been retrofitted at our workshop in Bristol.
This job took around 6 hours in total.
2022 Audi c8 RS6 towbar fitting. We have supplied and installed a Detachable Swan Neck towbar with 13pin Audi dedicated wiring which we code to the vehicle. This RS6 c8 with air suspension has a 2100kg towing capacity.
This RS6 tow bar installation takes 4 hours at our workshop in Bristol, UK (we do not supply parts only).
To ensure your vehicle is compatible please check youir VIN plate (drivers B Pillar)
Audi RS4 having Apple CarPlay and Android Auto retrofitted
2014 Audi RS4 (b8 chassis) having Apple CarPlay and Android Auto retrofitted into the existing Audi multimedia systems. This product is an addition to the Audi functions so no original features are lost. We have also installed a reversing camera which offers optic parking sensor overlay and moving guidelines with the steering wheel.
Installation completed at our workshop in Bristol.
2017 Audi TT S-Line mk3 installed with front heated seats. Both seats were stripped down in order to fit the flat carbon heating elements directly between seat sponge and seat fabric. Low, off and high settings controlled via the switches we placed below the hazard switch panel. The heated seats automatically turn off with ignition.
Allow one full day out our workshop in Bristol for the Audi TT heated seat retrofit.
2014 Audi S5 having a Thinkware Q800 Pro front dash camera installed along. We have also installed a Apple CarPlay and Android Auto interface which is controlled via the Audi steering wheel and controls. We added a rear parking camera into the same system.
2014 Audi Q7 4L S-Line (chassis) installed with a Westfalia detachable tow bar. This S-Line model has the removable towing panel (seen in photo 3) that hides the detachable housing and towing socket when in place. We also fitted an Audi dedicated towing wiring harness which fully integrates into the cars can network.
2007 Audi RS4 (B7) installed with a Sony XAV-AX5650. We removed the Audi RNSE radio and replaced it with the modern Sony multimedia station. Apple CarPlay and Android Auto are standard features. We retained both the Multi function steering wheel controls and full BOSE integration.
2015 Audi 3 Saloon (8v) installed with wireless Apple CarPlay and Android Auto via Audi radio controls and display.
Key Features –
- Retains ALL Audi features like Parking cameras and PDC overlay
- Wireless/wired Android Auto
- Wireless/wired Apple CarPlay
- Allows addition of aftermarket cameras
- Audio output through factory sound system
- Fully adjustable Audio EQ
2016 Audi R8 V10 Plus installed with a Autowatch Ghost 2 Immobiliser and Thatcham S5 insurance approved GPS tacking system. The Ghost 2 immobiliser inhibits the engine starting unless the correct code is entered by the driver. The driver uses a unique 4 to 8 sequence of vehicle controls/buttons to start the engine. This gives both key theft and key cloning protection.
2013 Audi Q3 (8U) installed with front parking sensors. We have taken before, during and after photos. This Audi Q3 already had factory rear parking sensors so we added the fronts making them look OE by using Cobra flush mounted and colour coded sensors.
2021 Audi E-Tron Technik 50 Quattro installed with a detachable tow bar and 13pin Audi dedicated wiring, coded to the vehicle. The all electric Audi E-Tron has a towing capacity of 1800kg which is very impressive and much better than rival manufacturers.
This particular Etron Technik model required a modification to the underside of rear bumper valance. This is not seen unless you look underneath.
This towbar fitting takes around 4 hours at our workshop in Bristol.
2021 Audi A4 allroad quattro installed with a removable towbar package and Audi dedicated electrics which we code to the vehicle to give enhanced ‘towing specific features’. Auto PDC cut-off, auto rear fog cut-off, electric handbrake adjust, electric tailgate via remote inop when towing, E TSP enabled etc etc
No visible bumper modifications so clean lines still.
2018 Audi R8 V10 Plus installed with some Thatcham and Insurance approved security. Love the Carbonwurks steering wheel..
2016 Audi RS6 retrofitted with genuine OE fit rear parking camera via the Audi MMi display. Move guidelines to duplicate factory installation. This required coding which we complete in-house.
2016 Audi RS6 (c7 facelift) installed with a removable towbar and electric socket suitable for cycle carriers using a Audi Dedicated wiring kit. This RS6 already had the removable towing panel built into the lower rear bumper diffuser. This simply pops of when you want to tow.
You must check your RS6 has been homologated to tow by Audi, see the last two pictures. If it hasn’t the 2nd line of weights will be empty.
2019 Audi SQ5 installed with a Westfalia detachable towbar and Audi dedicated electric socket coded to the cars ECU.
2021 face lifted Audi RS4 Avant having a removable tow bar installed. We have used a detachable Tow-Trust towbar and 13pin Audi dedicated (vehicle specific) wiring which we code in-house to the vehicle. We have cut a section from the lower carbon fibre bumper trim (this is on the underside so can not be seen).
Notes:
- Your vehicle must have a towing capacity stamped on its VIN plate (located on drivers side lower A-Pillar, near door hinge)
- If your RS4 has DRC (dynamic ride control) then we cannot install this or any other towbar
- Installation takes around 4 hours at our workshop in Bristol, England, UK
2014 Audi A3 Saloon retrofitted with a combined CarPlay and Android Auto module using the original Audi controls and radio display. We also added a rear parking camera which has moving parking lines.
2010 Audi A5 having a Apple CarPlay and Android Auto system retrofitted into the original Audi 3g MMI system. The system integrates seamlessly with the vehicle controls and retains all the factory functions so nothing is lost. Have a watch of the video below.
2019 Audi A3 Sportback (8v chassis) installed with a Westfalia detachable swan neck towbar and Audi Dedicated and Approved wiring loom. This audi a3 hatchback has the ‘shelf’ style rear bumper which hides the towing socket whilst not is use and the housing in which the detachable neck locks into.
2018 B9 Audi A4 Estate retrofitted with a genuine Audi high line reversing camera replicating a factory installation. Moving guidelines and APC (audi park control) overlayed on the Audi radio display.
2017 Audi S3 having privacy glass applied to the whole vehicle. Before and after pictures below.
2020 Audi A1 Citycarver having Heated Seats retrofitted. The high/low switches were positioned near the gear lever giving easy and visible access.
2020 Audi RS7 Sportback having a Scorpion s5 VTS Thatcham Approved Tracking System. Additional driver identification tags will give only the driver authorisation to start the engine.
2020 Audi A4 Avant / Estate b9.1 facelift model installed with a removable Tow Trust towbar and Audi dedicated 13pin electrical socket suitable for trailers, caravans and push bikes. Rear Parking sensors are automatically turned off when hitched up (see radio display). Vehicle will also monitor the bulbs on the item being towed, giving audible and visual warnings should the a fault occur.
2017 Audi a6 facelifted c7 version installed with a detachable tow-Trust towbar and Audi dedicated wiring, all coded in house. This Audi a6 Estate is the Ultra model with S-Line bodykit.
2020 Audi A6 Estate (c8 chassis) installed with a removable (quick release) Westfalia detachable tow bar and Audi dedicated and Approved 13pin electrical socket. This Audi a6 40 TDi will automatically enable Towing Mode once you have connected the towing socket giving enhanced towing features.
2017 Audi Q7 S-Line (4m chassis) installed with a detachable swan neck towbar and correct Audi dedicated wiring loom which integrates into the vehicles electronic system. Once the neck is detached nothing can be seen.
