2023 Vauxhall Grandland Hybrid towbar installation. We have installed a Westfalia detachable towbar and 7pin trailer socket using Vauxhall dedicated and vehicle specific tow bar wiring. The final part of this tow bar installation is coding the Vauxhall’s ECU which tells the car when you are and are not towing. This gives the additional features like automatically cutting off rear parking sensors whilst towing.
2016 Vauxhall Insignia A (first generation) retrofitted with heated front seats. Both seats stripped down and carbon elements installed. High and Low switches fitted onto each seat.
Same day installation at our workshop in Bristol.
2018 Vauxhall Astra K mk7 being fitted with a detachable Westfalia towbar. Our pictures show pre, during and post tow bar installation.
The westfalia detachable swan neck is completely hidden away behind the bumper when not being used.
2018 Vauxhall Insignia Grand Sport hatch installed with a Witter detachable towbar. The Witter removable tow bar car barely been seen once the swan neck is detached and electric socket swiveled up behind bumper. We installed a 13pin Vauxhall dedicated wiring kit which communicates with the cars electronics to make towing safer.
1993 Vauxhall Cavalier mk3 SRi having the factory Vauxhall Alarm System removed and upgraded. We installed a Sigma S30 Thatcham Cat 1 Alarm and dual Immobiliser system. We also added a tilt motion sensor and impact detection sensor.
2012 Vauxhall Astra mk6 / Astra J installed with a new Pioneer AVH-X3800DAB multimedia radio and rear parking camera. The original Vauxhall radio was a CDR400. You can still access the Vauxhall setting menus on the Pioneer radio so no functions are lost.
2021 Vauxhall Combo Life MPV installed with a Fixed Flange tow bar and 7pin (12n) towing electrics using a Vauxhall dedicated CAN wiring kit which integrates into the Vauxhall electrics safely. This Fixed Flange tow bar did not affect the daily operation of the factory fitted rear parking sensors but as an enhanced feature the Vauxhall dedicated wiring kit automatically turns the parking sensors off when towing, this required use to re-programme the cars ECU as part of the installation.
2017 Vauxhall Insignia B (second generation) retrofitted with heated front seats. The seats are removed from car then stripped down in order to install the flat carbon elements. The switches were installed in the customers chosen location on either side of the tunnel.
2014 Vauxhall Insignia Estate installed with a detachable Tow-Trust towbar and 13pin caravan electrics.
Vauxhall Zafira Tourer with add blue and spare wheel underneath installed with a Westfalia removable towbar and 13pin Vauxhall dedicated CANbus wiring. Dashboard warns of bulb failures on trailer or caravan and automatically turns off rear park assist when hitched up.
2015 Vauxhall Insignia hatchback installed with detachable swan neck tow bar and 7pin trailer socket.
Vauxhall Astra (k / mk7) Estate installed with a Witter G123S Fixed Swan Neck towbar and 13pin socket for a cycle carrier. The factory rear parking sensors were not affected by the towbar installation and operated exactly as they did before.
Vauxhall Movano Rear Camera installation using Third brake light conversion kit and 7″ smart monitor. Existing windscreen retained to support new monitor. Third brake light replaced with a combined Third brake light/camera.
