2025 MG ZS Heated Seat Upgrade
This nearly new MG ZS was supplied without heated seats, but a retrofit solution is available.
We install flat carbon heating elements mounted directly onto the original seat foam inserts, positioned beneath the factory upholstery trim. This method closely replicates OEM-style heated seat systems in both performance and appearance.
Typical installation time: 1 day at our workshop in Bristol
2025 Peugeot Rifter installed with heated seats.
This Peugeot E Rifter was upgraded with flat carbon heating elements installed in both the seat base and backrest. This process involves removing the seat and carefully stripping it down to integrate the heating elements seamlessly.
As the Peugeot Rifter shares its platform with the Peugeot Partner, Citroën Berlingo, and Vauxhall Combo, this installation is also compatible across these models.
The full heated seat installation takes approximately one day and is carried out at our Bristol workshop.
2023 Citroën DS4 Heated Seat Upgrade.
This DS4 heated seat retrofit takes one day at our Bristol workshop.
2019 BMW 120i M-Sport installed with heated front seats and rear parking sensors.
This BMW Sunset Orange Metallic 1 Series had everything except heated seats and parking sensors.
2019 Jaguar XE installed with heated front seats.
Allow one day at our workshop for a heated seat upgrade. Bristol, UK
Porsche 911 c4S (Gen 1 997 Chassis) installation of heated seats.
Both front Porsche seats removed and stripped down ready for installation of the flat carbon heating elements. The high and low switched were installed onto the seat plastics.
Allow one full day at our workshop in Bristol for this heated seat installation.
2022 Adria Motorhomes twin sports campervan installed with essential upgrades. We have added Vodafone Automotive front and rear colour coded parking sensors, heated front seats, Thinkware F790 dash camera and a Vodafone Automotive / Cobra 4615 Alarm system. For additional security we also added a Ghost 2 Immobiliser for key theft protection.
2017 Audi TT S-Line mk3 installed with front heated seats. Both seats were stripped down in order to fit the flat carbon heating elements directly between seat sponge and seat fabric. Low, off and high settings controlled via the switches we placed below the hazard switch panel. The heated seats automatically turn off with ignition.
Allow one full day out our workshop in Bristol for the Audi TT heated seat retrofit.
Toyota GR Yaris Ghost 2 Immobiliser and Heated Seats
2022 Toyota GR Yaris installed with the Autowatch Ghost 2 Immobiliser and heated seat retrofit. The Ghost 2 Immobiliser will inhibit the vehicle from starting even if you have they key. The immobiliser can be disarmed by pressing a sequence of vehicle controls, only the driver will know the correct code.
The flat carbon heated seat elements were positioned underneath the seat fabrics. This required the seats to be removed and stripped down to the framework. The high/low controls were installed to the seat plastics.
Installation for both jobs can typically be completed in one day at our workshop in Bristol.
2016 Vauxhall Insignia A (first generation) retrofitted with heated front seats. Both seats stripped down and carbon elements installed. High and Low switches fitted onto each seat.
Same day installation at our workshop in Bristol.
2016 Jaguar F-Type v6 installed with front heated seats plus front and rear parking camera’s via the Jaguar infotainment display.
We mounted the heated seat switches on the side plastics of each seat (customer preference).
The rear parking camera gets mounted to the OE position in the rear bumper, the front camera is neatly tucked up near the front badge.
2019 Jaguar E-PACE D180 installed with heated front seats. Both base and back have been installed with carbon elements underneath the leather trim. The high/low switches have been installed next to the electric seats controls.
You would never know the heat elements have been installed.
This type of heated seat installation takes one day at our workshop in Bristol.
2017 Maserati Ghibli installed with front heated seats. High and Low switches were installed next to the other electric seat switches.
This type of job takes one day inside our workshop in Bristol.
2021 Ford Fiesta Active retrofitted with heated seats and parking camera via the Ford SYNC 3 radio display.
2010 Mini Convertible R56 retrofitted with Heated Front Seats. Seats removed, stripped down ready for the flat base and back carbon elements to be installed covertly underneath the half leather seat trim. The high and low switches are mounted
2018 Hyundai i20 retrofitted with Heated front Seats. Switches were positioned either side of the tunnel at customers request.
2017 Vauxhall Insignia B (second generation) retrofitted with heated front seats. The seats are removed from car then stripped down in order to install the flat carbon elements. The switches were installed in the customers chosen location on either side of the tunnel.
2020 Audi A1 Citycarver having Heated Seats retrofitted. The high/low switches were positioned near the gear lever giving easy and visible access.
2019 Volkswagen T6 Shuttle installed with heated front seats. The carbon heater elements are installed into both base and back areas underneath the seat fabric just like a factory element would be installed. The switches were installed on the inside of the seat plastics.
2020 Toyota Aygo installed with heated driver seats. Flat carbon elements were installed into both base and back just like factory fit.
2019 Volkswagen Tiguan mk2 heated seats retrofitted. Switches were mounted onto the seat plastics.
Fiat 500 Heated Seat retrofit. Carbon seat elements are installed into base and back of each seat, we have mounted the switches next to the electric window switches. Each seat has an high & low setting.
Volvo V40 Heated Seat Installation. Lovely upgrade in time for the chilly Christmas period
Skoda Octavia VRS being retrofitted with front Heated Seats. The high/low switches have been installed onto the seat plastics as per customer request. This upgrade can be completed to most vehicles and generally completed within the same day.
2016 Suzuki Vitara (mk4) heated seat installation. Customer chose to have hi/lo switch fitted to the seat bolster.
