2019 Volvo XC60 – Reversing Camera & Full Screen Android Auto / Apple CarPlay Upgrade
This Volvo XC60 originally came with factory Apple CarPlay, however it was limited to a half-screen display. The customer wanted full-screen Android Auto capability, so we installed an aftermarket integration module that delivers seamless full-screen Android Auto, while also retaining Apple CarPlay functionality.
As part of the upgrade, we also fitted a discreet reversing camera with dynamic guidelines, improving visibility and parking confidence.
To complete the setup, the customer opted for a Thinkware U1000 PLUS front and rear dash camera system, providing comprehensive driving and parking surveillance.
The entire installation was completed in a single day at our Bristol workshop.
Volvo XC40 Front Parking Sensors retrofit.
We have added front parking sensors to this Volvo XC40 which was only equipped with reversing sensors. The 4 sensor eyes have been installed into the OEM locations giving a factory look. The sensors will automatically activate when the vehicle speed reduces to 6mph, when 12 mph is reached the sensors will automatically turn off. Our parking sensor kit also comes with a PDC switch, this can be used to manually turn them on or off.
Allow around 4-5 hours for installation at our workshop in Bristol.
2009 Volvo S80 having Rear Parking Sensors installed. We have installed Vodafone Automotive parking sensors colour coded to the vehicle.
2015 Volvo XC70 installed with a detachable swan neck towbar and 13pin fully populated caravan wiring. We have used a Volvo dedicated towbar wiring loom.
2017 Volvo XC60 (Gen 1) installed with Front and Rear Cobra Parking Sensors. We also installed a rear parking camera via the Volvo SENSUS CONNECT navigation screen.
The rear sensors & camera (with moving guidelines) automatically operate when reverse is selected. The Front sensors will also operate when reverse is engaged but can also be manually turned on when button on dash is pressed. They turn off after 10 seconds.
Around 1.5 days work at our workshop in Bristol
2021 Volvo XC40 R-Design installed with a detachable swan neck tow bar and Volvo dedicated tow wiring configured for trailers, caravans and cycle carriers. Although this example is very dirty the XC40 R-Design has a lower gloss black bumper section, this needs to be modified on the underside, nothing visible from the exterior unless looking under the car.
2021 Volvo XC60 installed with a Tow-Trust removable swan neck towbar and 13pin Volvo dedicated electrics.
The detachable neck can be removed in seconds and stowed away until required again. The 13pin electrics can be configured for cycle carriers and Trailers OR caravan too. We also offer 7pin basic lighting
We also offer a fixed swan neck option (not detachable) which is slightly cheaper and from our experience does not affect the factory reversing sensors, however we recommend testing first. If equipped with factory fitted reversing camera this will function in the same way as before.
All photos are taken post towbar installation.
This type of installation takes around 3 hours at our workshop in Bristol, UK.
2017 Volvo XC90 installed with a removable Tow Trust towbar and 13pin Volvo dedicated wiring socket for a caravan.
2018 volvo V90 installed with a Witter VL55Q detachable swan neck tow bar and approved Volvo wiring
First generation (2008–2017) Volvo XC60 installed with a Towtrust Fixed Swan Neck towbar and cycle carrier electrics. Rear Sensors were not affected by the fixed towbar in situe
Volvo V40 Heated Seat Installation. Lovely upgrade in time for the chilly Christmas period
